Garnet Polska

Tips for beginners

When you start using a waterjet machine, we encourage you to read a few practical notes on handling garnet correctly. This will help you avoid problems with a clogged mixing tube and clogged feed lines.

Garnet is a hygroscopic material, so it readily absorbs moisture when conditions allow. It must therefore be protected from contact with water and moisture. It should be stored some distance away from the machine, ideally in a well-ventilated place that is heated in winter. Big bags of garnet must always be protected from adverse weather conditions such as rain, snow or frost

Before pouring garnet into the pressure vessel, the small 25 kg jute bags must be opened. To do this, cut off the excess thread hanging on both sides and pull the string on the correct side, and the whole seam will come undone. At first, take a moment to work out which side and which string to pull. This time will pay off, as opening the bags will then be very quick and easy. Opening a jute bag with a knife or ripping it open will create loose pieces of the bag which, if they get into the garnet, can clog the tube. After opening a bag this way, it is best to take the garnet in its plastic liner out of the jute bag and only then pour it into the hopper. Alternatively, you can roll up the cut part so that no loose pieces can get into the garnet. This is the most common mistake made by beginner operators, so it is worth paying attention to.

Before pouring garnet into the pressure vessel, the small 25 kg jute bags must be opened. To do this, cut off the excess thread hanging on both sides and pull the string on the correct side, and the whole seam will come undone. At first, take a moment to work out which side and which string to pull. This time will pay off, as opening the bags will then be very quick and easy. Opening a jute bag with a knife or ripping it open will create loose pieces of the bag which, if they get into the garnet, can clog the tube. After opening a bag this way, it is best to take the garnet in its plastic liner out of the jute bag and only then pour it into the hopper. Alternatively, you can roll up the cut part so that no loose pieces can get into the garnet. This is the most common mistake made by beginner operators, so it is worth paying attention to.

Log inPL 0