Applications – sandblasting
Sandblasting garnet has a very wide range of applications in abrasive blasting. It delivers an excellent surface finish combined with high efficiency and low operating costs. Owing to its hardness and sharp edges, garnet is an aggressive abrasive. As a result, cleaning speed increases (by approx. 50% compared with copper slag and 80% compared with quartz sand), while material consumption is reduced.
The high purity of our blasting abrasive (in particular the absence of iron dust and its low chloride and sulphate content) means it can be used to clean surfaces of almost any material, e.g. stainless steel, non-ferrous metals, their alloys, etc.
Industries in which sandblasting garnet is used for abrasive blasting include:
- shipbuilding and ship repair
- construction and repair of bridges, viaducts and steel structures (both above and below water)
- restoration of historic buildings and facade cleaning
- surface preparation prior to corrosion protection in the metallurgical industry
- maintenance work in chemical plants, gas facilities and power stations
- cleaning of road and rail tankers
- textile processing, e.g. stonewashing denim
In addition, the very low resistivity of garnet grains ( < 100 Ωcm) prevents sparks from forming when the grains come into contact with a metal surface, as well as the build-up of electrostatic charges. As a result, garnet is successfully used in locations at risk of explosion or fire, e.g. on tankers, gas and oil platforms, in refineries, at filling stations and in chemical tanks.
Wet abrasive blasting with a sandblasting abrasive has several particular advantages:
- Sandblasting garnet is harder and heavier than sand, and water further increases the mass of its grains, so the surfaces being cleaned reach the required roughness more quickly.
- Thanks to the sharp, irregular crystal structure of the blasting abrasive, the roughness profile obtained during cleaning (sharp-edged) is exceptionally favourable for the adhesion of protective coatings applied afterwards (sharp peaks are formed rather than the rounded ones produced by grit or sand).
- At the same time, the water washes contaminants such as dust, grease and salts off the surfaces being treated.
- Water almost completely eliminates dust, and the spent abrasive falls a short distance from the surface being cleaned, which makes its disposal easier.